Join the C34 Association Today!
[C34 Home] [C34Tech Notes] [C34 Tech Wiki] [Join!]
Please login or register.
Advanced search  

News:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - TonyP

Pages: [1] 2 3 ... 9
1
Main Message Board / Re: Buying a Pre-owned C34 - What to look for?
« on: March 18, 2015, 02:18:17 AM »
Jon
Don't worry about a bit of water coming down your mast... you have a bilge pump. A sponge gets the rest if it concerns you.
I think they are one of the best large volume coastal cruisers  around.

2
Main Message Board / Re: First Overnight of The Season
« on: March 18, 2015, 02:07:04 AM »
Same as us Downunder .... I just helped a mate bring his new to him '97 C34 mk2 down from Brisbane to Newcastle ... got bashed by Southerlies ... will complete the trip to Pittwater (14hrs) Monday (sunday night your time)
It does get chilly here in June/July August but nothing a good blanket won't fix

Tony

3
Main Message Board / Re: Elliptical rudder and other fun stuff
« on: March 18, 2015, 02:02:26 AM »
With the port trims ...
I priced the local plastics manufacturer and found it was a tad over the top to have them remoulded.
With todays technology 3D printing may be the way to go .... would be cheaper if someone did a big order and maybe sold for a profit.

Tony
(I have sold Moonshadow but helping  friend sail his down our east coast 500 n/mls)

4
Main Message Board / Re: Windlass light
« on: June 15, 2014, 02:55:25 PM »
Greg

Here is a pic of my solenoid. Your pic is definitely the underside of your foot switch.


5
Main Message Board / Re: Calibrating the knot meter?
« on: June 07, 2014, 04:32:49 PM »
Steve ...   Google it.

I know we can with our 2012 60's. Ours runs slower by a knot and a half or more.
Although we haven't bothered to as a gps is accurate for us.
We do have a measured nautical mile marked on the shore where we sail.
You need to time runs in both directions to work out actual speed over the distance.
I read it in our instruction manual.
Hope this helps though yours is an earlier model.

good luck

Tony

6
Main Message Board / Re: Inverter recommendation?
« on: May 17, 2014, 03:31:59 AM »
What ever you want to use , you need at least double the said wattage.
I would use a 1200 inverter minimum for your 600 watt microwave.
When an appliance starts, it needs a peak load(double), then backs off to the said load.

Tony

7
Main Message Board / Re: Priming a transfer pump
« on: April 12, 2014, 11:13:40 PM »
MRE
Could it be you are trying to raise the water too high with your 50ft of hose.
Just a thought

Tony

8
Main Message Board / Re: Distribution Panel
« on: April 12, 2014, 11:05:17 PM »
Here is a pic of our panel for reference to show changes

9
Main Message Board / Re: teak bright work
« on: March 22, 2014, 03:22:47 AM »
I love Deks Olje ... but some teak should be left bare.
Tony

10
Main Message Board / Re: Blisters on Boot Stripe
« on: March 20, 2014, 02:02:26 PM »
some pics of our blisters a couple of years ago in replays 6,7 and 8.

http://c34.org/bbs/index.php/topic,6699.msg44200.html#msg44200
cheers
Tony

11
Main Message Board / Re: Davits
« on: January 29, 2014, 09:08:37 PM »
Steve

The longer the tow line the more trouble I believe one will have when towing.
If I do tow,(and inshore only) I pull the dink right up hard almost(ours is a soft bottom inflatable).
In reality it is easy to either pull up on the foredeck or deflate and stow.
Otherwise if you have bulging pockets then, by all means get some davits. Maybe the fold/swing in type when not in use.
cheers from down under in fabulous summertime. :thumb:
Tony

12
Main Message Board / Re: Seacock Strainers
« on: January 27, 2014, 12:29:11 PM »
Lance

I would follow Mainsails advice and NOT fit an external strainer as they will foul (unseen) with growth, paint or debris.
There is a link on this site for pics on his site as well as an explanation.
Just a Forspar or similar strainer internally is the way to go. Easy to clean and maintain whenever you are on your boat.

cheers
Tony

13
Ian

I would say at a guess they would be for Lazy Jacks for the main.

Either reinstall them (Lazy Jacks) or remove what you have just dangling as the paint will get damaged on your mast.

cheers from downunda

Tony

14
Main Message Board / Re: Propane Locker Mod
« on: January 19, 2014, 02:06:38 AM »
Thanks for sharing your post Mark. :thumb:  I'm certain alot of folks here will benefit from your modification.


BTW... :nail :nail

You certainly are more bold than I in tempting the Gods of the deep with your boat name. :shock: :shock: :shock:

Just Kidding   8)

What happened to Unsinkable I ? :donno: :party

Hahaha .... Probably sunk !!!!! :cry4` :cry4` :cry4`

Obviously our 91/92 had a 10lb/4kg storage fitted  :thumb:

Tony

15
Main Message Board / Re: Nice day ....
« on: December 17, 2013, 10:55:56 PM »
Waterdog
The only times I have been to the states was to surf in January (Ocean Beach SF and Santa Cruz Steamer Lane and Pleasure Point), and Poker in Vegas. Mmmm cold water and cards...
I will keep an eye out for an invite lol.

Pages: [1] 2 3 ... 9