Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - DMorri3035

#1
Main Message Board / Re: Flex-O-Fold Propeller
August 09, 2018, 05:59:58 PM
My WOT is 3200 in neutral and 2200 in gear with my 15x10 Michigan Wheel.  Before I order my new prop I don't want to be over propped and feel my wide open throttle in gear should be 2800 to take advantage of the higher power band of the engine.

Thanks for the info -

Just wondering if anyone else out there has the 2 blade flex-o-fold with the M35 and Hurth 100 and what their WOT in gear is.

Curt
#2
Main Message Board / Flex-O-Fold Propeller
August 08, 2018, 08:40:08 AM
I have a 1990 (#1093) C34 Mark 1.5 with a M35 30 hp.  I have been looking at several different folding props and really like the Flex-O-Fold 2 blade.  Just got a letter back from the factory and they suggested a 16x13R propeller.  Now I have a 15x10 Michigan Wheel 3 blade fixed and I believe I am over propped as I can only get 2200 rpm on the newly calibrated tach at 7 knots perfect conditions.  What size shaft did my boat come with and what is the forward ratio of the Hurth 100. 

Curt Morrison
#3
Thank you for all help!
#4
I have a 1990 C34 and removing the old curtain tracks and replacing them with shades.  What do I fill the holes with to make it match the rest of the cabin?
#5
Main Message Board / Anchor Light Replacement LED Bulb
October 14, 2014, 05:02:39 PM
I have a 1990 C34 that I want to replace the original anchor light bulb with a new LED bulb in the same fixture.  Does anyone know what type of bulb is in there now.
#6
Hi,

We would like to come and see your boat.  We live in Ohio and are tied up until mid Feb-Mar.  Are the sails original and are they in good shape.  Are the electronics original and if so in working order.  What else can you tell us about the boat and do you have pictures of her.

Thanks,

Curt Morrison