Topics

Hello,
Is there a direct substitute for the 3 7 2 0 2 - 0 0 0 0 that is being use in the shower sump area
Regards and Thanks in Advance
Kevin
#5 5 3

Question , We have owned #553 for 6yrs. And now we live aboard full time. Wife would like to use shower , but the water will not drain ,rebuilt the pump under the head sink and all it does now is either blows water from drain or nothing at all (over flows). One suggestion is to disconnect hose from pan floor and drain into bilge.
Any suggestion?
Thanks In Advance.

Free , 1/2 companionway cover (from traveler to appx. 6" below threshold) ,head hatch , salon hatch and vee hatch and mainsail cover these are all from 1988 , Standard rig . Some light sewing and cleaning to be done 0n Mainsail cover . Color " Pacific Blue .
All hardware functional and velcro on mainsail good. Let me know soon , you pay shipping from New Orleans area.

Have 2 SAFT batteries , wanting to replace them with 2 ea of the Optima Bluetop Group 27 , Optima 's low maintenance is the primary reason to change out any thoughts on other type of batteries ?
Regards,
Kevin

Question ...... I'm planning on a primary fuel filter, Racor 500 ma series upgrade. Is it required to have the metal heat bowl? I've seen installations where they have been omitted , and even the ones that are , the USCGAux.(NOLA) have given them the thumbs up and have not flagged no bowl install , any input would be great.

Regards,
Kevin

Still no luck, with the correct routing , halyard runs thru thru the mast slot, to the swivel block on the mast base, thru deck block, thru fairleads under traveller and then used the winch to haul up headsail checked the tension it's way above 220 lbs sounds like a bass string .
Also this would prevent me from using the traveller winch. Went to Wiki manuals and no luck .
Thanks To All For The Help.
Kevin

Just got home from offshore and checked on the set up of the headsail (jib) , a friend rigged it for me while i have been away. It (halyard ) is run through the fiddle block like i remembered but it is terminated on the winch on the port side and it is extemely tight ,but the sail is up and no loose foot , should the fiddle block also have a cleat on it as a unit ????  Any thoughts or suggestions would be helpful.
Regards ,

Kevin

I'm having issues with my 100nm TacTick everything is good battery, poistion of indicator but......Hull Batt will sound off and will have to reboot (turnoff then on again) Raymarine isnt very helpful for this theysuggest buy a new unit , BTW it is out of warranty , but since ive had it , it's been worth the money .
Thanks Again !

Hello,

A couple of questions getting away from 7/16" jib/headsail sheet to go with a 1/2" sheet used on a Lewmar 46 series , which / what kind is the most commonly used and lenght.One more question useing a Racor 24 series fuel filter set and would like to up grade to the Racor Turbine any suggestions on either questions ?

Any Help Would Be Greatley Appreciated.
Regards,
Kevin