Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Susan Ray

#1
Main Message Board / Re: New head
May 07, 2021, 03:43:56 PM
It wouldn't load other pics..heres one more. Hope they help.
#2
Main Message Board / Re: New head
May 07, 2021, 03:41:10 PM
Aloha,
Sorry I didn't get back sooner. I will attach more pics. The installer didn't modify anything but turned it slightly to stern, and add teak block.
Good Luck!
#3
Main Message Board / Re: New head
April 21, 2021, 06:48:24 PM
It's a 2018 Marine Elegance by Raritian.
#4
Main Message Board / Re: New head
April 21, 2021, 02:00:55 PM
Aloha,
I had a new head installed and he made a teak pedestal that worked well. I will attach a pic for you.
Cheers, Susan
#5
Main Message Board / Re: salon table pedestal rebuild?
September 10, 2020, 08:18:57 AM
It was cut down to 36" x 22". There are three teak fiddle's on the original table ...the long one fit on the inside and combined two on the outside of the new table.
#6
Main Message Board / Re: salon table pedestal rebuild?
September 09, 2020, 01:32:22 PM
Trying one more time for a photo of the cut down table.
#7
Main Message Board / Re: salon table pedestal rebuild?
September 08, 2020, 08:24:38 PM
Aloha, I hope I haven’t posted this before .....I  had the table cut down and used the wood that was on the original one on the sides. Plus wood tape around all the edges.Now it swivels so that people can get into the seating and it’s enough room for dinner for four. I don’t use it as extra sleeping area.( for some reason my photo wouldn’t post)
#8
Main Message Board / Re: Teak Grate in Head
July 13, 2019, 06:48:18 PM
Aloha,
I'm not sure if my last message posted so I'm doing it again! I did not keep the rubber feet on the bottom. And the friend who cut the wood for me used some of the pieces cut off as additional support on the bottom. It wobbled a bit so I cut some wine corks and attach to superglue it works fine now.  Good luck
#9
Main Message Board / Re: Teak Grate in Head
June 26, 2019, 02:44:17 PM
That looks excellent! I'm glad I could help you out to improve the looks of the head. Aloha
#10
Main Message Board / Re: Sail number 534
June 25, 2019, 03:59:33 PM
 Thank you all again! I think I have it figured out ..
#11
Main Message Board / Re: Nicro Dorade (1989) Parts
June 24, 2019, 03:45:10 PM
Aloha,
I added these solar vents in place of the cowl vents.
There's lots of sun here so they work fine!
#12
Main Message Board / Re: Sail number 534
June 24, 2019, 03:32:18 PM
Thank you all for the responses :clap.
From what I understand the sail number is inside the HIN number? The HIN ends in 0833G889.  I know the 89 is the year so is the 833 the same as the sail number?
There is no info under the fwd berth. There is a plate on the inside transom but worn off.
Thank you again for your help finding #534.
#13
Main Message Board / Sail number 534
June 23, 2019, 06:13:37 PM
Aloha,
I just bought a used main sail made for the C34 number 534 on the sail. Any way to find out what boat it came off of? Just curious.
And while i am on the subject...The hull number on my boat is illegible, can I find it elsewhere?
I would appreciate any help from anyone! Mahalo, Susan
#14
Amazon is selling a SeaTeak small cockpit table for $284. and Defender has the large SeaTeak with fold out sides for $299. both a lot less than regular price right now.
#15
Aloha,  I know this is an old thread but I just had my table cut down so it will swivel to let people in to sit down. It works for me !