We just took off the original "oil can" type intake. Before I toss it does anyone want it? You pay only shipping.
What did you replace it with? I am looking at the K&N RU-2450, thoughts?
We used the k&n R1080
https://www.amazon.com/gp/product/B00062YNHS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
The RC 2540 was too tall.
Per your other note It was not difficult. I chose a K&N which fit vertically and the diameter of the intake pipe.
I used a nylon "L" shaped barbed fitting. Drilled a hole in the top of the filter, screwed in the barbed fitting and connected the hose. This can be found at Home Depot or a hardware store.
I ended up using the K&N RU-2450, pictures of the installed filter are attached.