I just saw this in the internet and thought it might be helpful in some cases.
http://www.liveleak.com/view?i=ba2_1475277076
Yeah and after you crash the fuel dock, you can remove the fold in your hull juzt as simply.
https://www.youtube.com/watch?v=cVUxnZOWkAU
Let us know how it works :rolling but be sure to vid it.
-kk
Is it April 1st already? I missed it -- where did the Winter go to?
-k
I frequently use this technique when my car's gas tank cap gets stuck... :shock: :abd:
And it must have worked perfectly cause you're still alive.
Thanks Mike, I overhauled turbines in a power plant, we would often heat a stuck stud and touch the threads with canning wax, usually did the trick, not sure why the negative posts.
I would think that someone would come across a rusty bolt or two on a diesel engine if not a lug nut.
This is my go-to tool for freeing up stuck stuff. Mine was made by the Chevron motors, tools div. No fire, just real hot soapy water. Works every time.
Quote from: lazybone on November 08, 2016, 10:35:49 PM
This is my go-to tool for freeing up stuck stuff.
Now I'll call up a whole new visual next the time I'm asked "
Do yah want a fountain drink with that?"
Quote from: Mike and Joanne Stimmler on November 08, 2016, 11:50:37 AM
I would think that someone would come across a rusty bolt or two on a diesel engine if not a lug nut.
I'm going to have to remember and try the wax trick the next time I get a stuck bolt. Thanks Mike.
Quote from: lazybone on November 09, 2016, 03:32:38 PM
Quote from: Mike and Joanne Stimmler on November 08, 2016, 11:50:37 AM
I would think that someone would come across a rusty bolt or two on a diesel engine if not a lug nut.
I'm going to have to remember and try the wax trick the next time I get a stuck bolt. Thanks Mike.
But you must replicate the vid -- on a 1/2" bolt, extra-heavy nut, a huge heat sink firmly against them, and use only a lighter for 15 seconds (or until you burn your fingers or melt the plastic under the metal shield.)
See what happens (or more to the point, doesn't happen.) You don't even need a stuck nut.
-kk
Quote from: KWKloeber on November 10, 2016, 01:06:59 AM
Quote from: lazybone on November 09, 2016, 03:32:38 PM
Quote from: Mike and Joanne Stimmler on November 08, 2016, 11:50:37 AM
I would think that someone would come across a rusty bolt or two on a diesel engine if not a lug nut.
I'm going to have to remember and try the wax trick the next time I get a stuck bolt. Thanks Mike.
But you must replicate the vid -- on a 1/2" bolt, extra-heavy nut, a huge heat sink firmly against them, and use only a lighter for 15 seconds (or until you burn your fingers or melt the plastic under the metal shield.)
See what happens (or more to the point, doesn't happen.) You don't even need a stuck nut.
-kk
As you know paraffin becomes a liquid at a relatively low temp. I know nothing about its creep properties, maybe its very good? I think you are looking at the lighter as if it was for thermal shock. I think its just to move the paraffin.
I'm going to give it try when I get the opportunity.
Quote
I'm going to have to remember and try the wax trick the next time I get a stuck bolt. Thanks Mike.
Quote
But you must replicate the vid -- on a 1/2" bolt, extra-heavy nut, a huge heat sink firmly against them, and use only a lighter for 15 seconds (or until you burn your fingers or melt the plastic under the metal shield.)
See what happens (or more to the point, doesn't happen.) You don't even need a stuck nut.
-kk
Quote
As you know paraffin becomes a liquid at a relatively low temp. I know nothing about its creep properties, maybe its very good? I think you are looking at the lighter as if it was for thermal shock. I think its just to move the paraffin.
I'm going to give it try when I get the opportunity.
Obviously, the obvious trees are getting lost in the forest here.
Yes, no question paraffin can be used as a lubricant to free stuck threads. :idea:
Yes, applying enough heat will melt the wax and (just like sweating a copper fitting) suck it into the threads. :clap
Google/YouTube the subject and you'll see mechanics use a VERY HOT source like a mapp or acetylene torch, and not a butane flame that's not supercharged -- for just for a few seconds. :shock:
Just like sweating a copper pipe/fitting, you must heat the bottom of the nut, and the stud sufficiently, which are both on huge heat sinks (the iron brake drum and the steel wheel,) to transfer enough heat to raise the surface temp to 140 or so to melt the wax. This doesn't happen with a butane flame for 15 seconds. :shock:
Forensics:
Notice the mapp torch that just happens to be lying there, and that he's fiddling with in the beginning -- a hint? :think
Notice he grips the lug wrench palm down and straight-arms it? :think So it appears he's applying a great amount of torque to the lug nut? :shock:
Slow down the vid to 1/4 speed and notice absolutely no flex in a bicep or any other muscle or notice any tendons popping out, although he "convinces you" that he's giving the wrench all the guts he has? :think
Notice the wheel doesn't rock -- not even one fraction of a mm -- although he "convinces you" that he's giving it all he has? :think
Notice he grips the lug wrench the correct way (palm up) when he's miraculously able to remove the lug nut? :think
Notice he doesn't put his show on for the 2nd lug nut? :think You just naturally ass/u/me it's just as "stuck" because he's gained your confidence -- that's what's behind Magicians getting away with half of their slight-of-hand tricks. :shock:
Yes, just like compressed air can be used to pop out dents in a fender, wax can be used to loosen threads --- just not in the way the two bogus videos "demonstrate." If it can, I have a bicycle pump for sale. :rolling
-kk
I use Kroil penetrating oil, it works on the majority of stuck rusted fasteners I've run into (not all) without heat. Based on its smell it is certainly a distilled hydrocarbon. Paraffin is a distilled hydrocarbon.
In a pinch it might be a viable alternative.
I am still stuck on the photo of the Chevron enema bag... :D
Can I supersize the fries and fountain drink for yah?
Quote from: KWKloeber on November 10, 2016, 02:20:42 PM
Can I supersize the fries and fountain drink for yah?
I didn't ignore you on purpose, so there's no need to do that.
Quote
I didn't ignore you on purpose, so there's no need to do that.
What does this have to do with adding to Noah's post and my prior one (re the FOUNTAIN bag?)
Must be the political season. :-)
Quote from: KWKloeber on November 11, 2016, 01:48:45 PM
Quote
I didn't ignore you on purpose, so there's no need to do that.
What does this have to do with adding to Noah's post and my prior one (re the FOUNTAIN bag?)
Must be the political season. :-)
Please, I apologize for upsetting you.
Quote from: lazybone on November 11, 2016, 02:10:46 PM
Please, I apologize for upsetting you.
Upset, Moi??? Nah :-)
Baffled maybe. or maybe it's my CRS. Late last night a Silver Alert came across my cell. I had to look it up to check if it was about me. LOL
-ken
I apologize for all the commotion I caused with this post.
Mike
Don't apologize Mike! That candle lighter gag was very thought provoking. I especially liked the Chevron Douche Bag! and the guy duct taping a fender for air pressure! A w e s o m e.