I have a 1992 C-34 with a walk-thru transom and I need to replace a valve on the cockpit shower. The hot water valve was hit by something and now appears to have a small crack in the assembly that the water comes into the valve. I went to Catalina Direct and they no longer stock the valves, but only the entire shower assembly. I would prefer not to buy the entire shower assembly, but simply replace/repair the valve. I noticed the break while putting the boat away for the weekend, so did not have a lot of time to investigate. So, I don't know the extent of the damage...appears most of it is plastic, so I am assuming it could be tough to find replacement parts at the hardware store....I am assuming several of you out there have come across a similar problem...ANY ADVICE?
Don't assume it will be a tough find at the hardware store. I once had to replace a plumbing part on a 1971 boat (about 15 years ago). I was quite surprised to find the part at my local hardware.
Another place to look is online RV parts stores. I was researching for the same replacement a few years ago and found several candidates. I did not replace because the faucet was not actually bad. Long story!!
I have the same project lined up for our 1993 model (cracked valve, in this case due to an unexpectedly early freeze). I found this source online, but haven't confirmed that it's the exact model- but the dimensions and shape look correct.
http://www.replacementboatparts.com/MixerValve.aspx
I need to do the same to my 93. Did you try that valve with success?
I don't know if this is close to what you have but have a look - https://ssicustomplastics.com/products/?route=product/product&path=91&product_id=145. SSI makes the cockpit showers for the C350.
I couldn't find a replacement valve but did find a shower assembly the same size...
https://www.amazon.com/gp/product/B00FZHARGU/ref=od_aui_detailpages00?ie=UTF8&psc=1 (https://www.amazon.com/gp/product/B00FZHARGU/ref=od_aui_detailpages00?ie=UTF8&psc=1)
At least it appears to be the same size. I haven't pried the old one out yes. It's so stuck, I'm afraid it may be installed with 5200.
Mike