I've been searching the Forum and discovered two different sizes for keel bolt sockets. Which is correct? 1 1/8 or 1 1/4? Thanks, Kerk
1 1/18...Kerk
kerk, gary is right 1 1/8" , deep style, 1/2" drive. socket. you will need an extention about 9" long, and a 1/2" ratchet or pull bar...jeff
Thanks, sailors. Kerk
Kerk : If you'd have looked in "Projects" you would have seen a picture of the tool I made !! You'll also need a universal for 2 of the keel nuts and an extension a little longer than 9" to do the job. Equally as important as the of 1 1/8" size, is that it MUST be 4 " deep!!
The information is there for the reading. :wink: