Many thanks to Bob Lancaster of Sjora (#1420). I have had a leak since commisioning last year that turned out to be just what he suggested: a missing bolt in the rub rail. Apparantly, when the clowns at the factory can't get a bolt to cooperate, they just pull it and move on. We both had a 1/4" hole in the spot where the head/NAV station bulkhead meets tha hull. The scuppers dump half the deck water on either side of that low spot. I put a huge squeeze of Boat Life caulk into the hole and set a well caulked 1/4" x 1" pan head screw into the hole. Something to check if you have a leak in the head that appears from under the countertop. Thanks again Bob.