Catalina 34

General Activities => Main Message Board => Topic started by: Tmacmi on June 07, 2021, 08:07:07 AM

Title: Width of cradle
Post by: Tmacmi on June 07, 2021, 08:07:07 AM
My boat yard limits cradle width to 7' No jack stands allowed.

Is there a typical cradle width?
Title: Re: Width of cradle
Post by: KWKloeber on June 07, 2021, 12:54:42 PM
I believe the owners manual shows the cradle and dimensions?
Manuals are on the wiki website, under "manuals"
Title: Re: Width of cradle
Post by: Ron Hill on June 07, 2021, 02:44:38 PM
Tmac: If you are a MK 1 C34??  the width of the stern cradle width is 7' 8" .  Ref : page 5.2 of your owners manual.

A thought   :cry4`
Title: Re: Width of cradle
Post by: Tmacmi on June 10, 2021, 08:20:58 AM
Hmmmm. I'll have to measure the cradle of the C34 that was in front of me this winter. Either that sets a precedent or they will have grandfathered it in.
Title: Re: Width of cradle
Post by: Ron Hill on June 10, 2021, 01:48:48 PM
TMAC : It makes no sense to limit the width of a cradle, because the width of any sail boat is wider than the cradle!!!  Best recheck the Yards requirements!

BTW, do you have a Mk1 or II ???   Hull number??

A few thoughts