Hello,
Is there a direct substitute for the 3 7 2 0 2 - 0 0 0 0 that is being use in the shower sump area
Regards and Thanks in Advance
Kevin
#5 5 3
Hi Kevin,
If you are referring to the shower sump pump this should be the model http://store.hamiltonmarine.com/browse.cfm/pump-shower-bilge-12v-4.5-gpm-7.5-amp-120446/4,52515.html
Replaced ours this spring (1986 C34). The model was a perfect replacement to the original including attachment screw holes. It also includes an inline strainer to be installed between the sump and pump.
Gary
Gary,
Thanks for the quick reply , same as what I have in ours, but the pump is is loud everyone in the Marina knows what you are doing.
Many Thanks
Kevin # 5 5 3
Quote from: KINGAIR350 on July 26, 2015, 08:33:00 AM
Gary,
Thanks for the quick reply , same as what I have in ours, but the pump is is loud everyone in the Marina knows what you are doing.
Many Thanks
Kevin # 5 5 3
There's a newer version with a shroud over the pump arm.
Ken
Quote from: KINGAIR350 on July 26, 2015, 08:33:00 AM
Gary,
but the pump is is loud everyone in the Marina knows what you are doing.
Kevin,
That's GOOD! :D
They know you're taking a shower and are nice & squeaky clean! :clap :clap :clap
Kevin : You can replace the Whale diaphragm pump or substitute a rotary pump (like your fresh water pump) instead. Your choice!!
A thought
Hey Guys,
Thanks for the in put I'm going with the Whale product Ron, as far as everyone knowing I'm taking a shower it's kinda like the Admiral thing also
Regards,
Kevin
I thought about replacing mine. How do you reach the thing?
Cliff : With some difficulty, thru the door under the head sink!! :cry4`
You can gain a bit more room to work with by removing the door and the frame.
A thought