So after much discussion I went to check the bolts yesterday and realized the aft bolt is impossible to tighten. The bolt is so far aft in the bilge I am not able to get the socket over over the bolt. I tried every combo of flex socket and extension I had with no luck. Has anyone with a MK11 had better luck?
Cory,
I wasn't able to use my torque wrench on that bolt myself. I used a breaker bar and estimated the force. As I had just torqued the other keel bolts, it's real close. May be a "crows foot" would work. The torque would need to be recalculated.
Jim
How about drilling a hole through the battery box floor or under t&h veneer for an extension bar?