Print Page - Pressure cap on Universal

Title: Pressure cap on Universal
Post by: morgan4848 on January 16, 2003, 10:26:21 PM

I have a 1986 MkI with the Universal M25. As I was doing routine maintence on the Universal M25 I noticed a crack in the pressure cap for the cooling system. There are no markings on the cap to indicate the pounds pressure. I checked the manual and the tech notes with no luck. Anyone know what the correct replacement would be?

Title: M25 Coolant Cap
Post by: Stu Jackson on January 17, 2003, 09:01:20 AM

My inventory list says: ï»¿Engine: Coolant Cap Universal Installed 1/3/99 Use # SKE SK3516 small #14 DON'T Use #SEN6582 #15

I was given the wrong one originally by our local Universal parts dealer, and had to go back and switch to the right one. If you have a local dealer, bring the old one in.

Also check the Universal website:

http://www.marinedieseldirect.com/universal/ (http://www.marinedieseldirect.com/universal/)

Catalina 34

General Activities => Main Message Board => Topic started by: morgan4848 on January 16, 2003, 10:26:21 PM