I was talking to Guido at Garhauer today about getting replacement sheaves for my halyards. He said that he thought the sheaves were the same as for the C-36 but was not sure. I have checked the wikis and other posts and can't find that information where the subject is discussed. He said if not that he needs to know the outside diameter, thickness and inside diameter of the the center hole. Does anybody know if they are the same as the 36 or what the measurements are? My boat is 50 miles away and lots of snow. Blue Moon is a 1988 #815.
Mark Mueller
They are the same as the C36. I shared an order with a friend who has a 36.
Installed three Garhauer 36-MH sheaves last year with great results. A simple and easy project - once the stick was down, of course.
Guys : Anytime that there is a question when you're talking to Garhauer and one of the "Indians" doesn't know the answer, talk to Bill - the Chief. :thumb:
I'm pretty sure you have the plastic sheaves installed. Garhaurer has a ball bearing replacement which is really slick. I installed them last year and they made quite an improvement in effort. A little pricey though.