Aloha...Does anyone have a schematic for a 26ST 2-Speed Maxwell winch circa 1987? If not, do you know if there are any 'tricks' to taking it apart?
Thanks, Susan
Susan : Don't know that much about a Maxwell, but to save you some grief and not feed the "Stainless God" that lives on the waters bottom - here's a tip.
Take a bottom to a 24 can soda carton. Cut a hole in the bottom the size of the winch and place it over the winch before you start to take it apart. If you happen to drop any parts/screws - they will fall into the carton and not overboard!!
A thought. :wink:
The August 2007 Mainsheet magazine, C34 Tech Tips had an article with pictures of the Maxwell Winch Overhaul.
I sold mine with the boat, but I got it from Maxwell. Just call them up and they'll probably send you one for free too. :thumb: Or they may even have the info on their web site.
Thanks to all..Bill for the schematics and advice from Ron. I will tackle overhaul this week then move to the next problem of finding the parts I need to replace. I'm hoping they aren't specific to the Maxwell. Mahalo, Susan
Stu, when I wrote the article last year on winch maintenance for the
August issue, I attached copies of the schematics, as well as photos. The
schematics didn't make the article. I sent them to both the tech editor and the projects editor.
Perhaps they could print them up in the projects section. My thought is that they are pretty detailed
and I don't think you will be able to see them if I reduce them in size and post them on this forum.
I found this on the internet:
Maxwell Sheet Winch Parts and Service
Maxwell Marine have sold all their Sheet Winch spare parts and tooling to the Australian Yacht Winch Company known as ARCO. ARCO are world renowned as a source for spares for old Sheet Winches. Their contact details are www.arco-winches.com or telephone: +61 2 9623 2448 or fax: +61 2 9623 2265. Arco are based in New South Wales, Australia.
Hope this helps,
Mike
Bill, thanks for sending me the schematics, which we'll post on the new improved Tech Notes Online soon, along with the original article and pictures.
Mike, that's a great resource and I'll add it to the Tech Notes Online article, too.
Hi will you send the schematics, pictures and article too me. Thank you
Schematics, thanks to Bill. You can copy and paste these photos and blow 'em up on your photo viewer or Photoshop software.
No. 2