General Activities => Main Message Board => Topic started by: jpaulroberts on May 17, 2005, 09:35:48 PM
Title: Hull core
Post by: jpaulroberts on May 17, 2005, 09:35:48 PM
I removed the old dynoplate that was in the hull under the head sink. I want to fill the two 1/4 bolt holes. I believe the hulls are solid glass (1987) but just want to make sure. Thanks, Jerry
Title: Hull core
Post by: SteveLyle on May 18, 2005, 04:23:14 PM
Yes, the hull is solid fiberglass/polyester epoxy.