Catalina 34

General Activities => Main Message Board => Topic started by: girmann on May 01, 2022, 08:05:55 PM

Title: Companionway hatch cover (Sea hood) delaminated
Post by: girmann on May 01, 2022, 08:05:55 PM
I was talking this off today because the caulk looked like it could be leaking and, well I guess I was right. Taking this piece off showed significant delamination on the starboard side and minor delamination on the port side. It would seem that the caulk under the screeds failed and let water past. Sounding it the best I could, it seems like on the stbd side, it goes about 2" in and on the port side, maybe 3/4".

Questions? Since this isn't structural, I think I can just fill it with penetrating epoxy, clamp it, and call it a day. Is that right? I almost feel like another layer of glass could help, but I don't know that I want to get that deep into it.

Sounding the deck under this cover didn't reveal anything interesting and sounded like pretty solid glass underneath. I may take a bent nail and fill it with epox just to make sure. Is there anything else I need to do?

The guy in the J28 next door said to dry it out, but it's been sitting all winter. I can't imagine there's any moisture left, other than what's in the air.

Mark
Title: Re: Companionway hatch cover (Sea hood) delaminated
Post by: Stu Jackson on May 02, 2022, 12:58:27 PM
From the 101 Series, this might help:

Sliding Hatch Teak Removal 101  https://c34.org/bbs/index.php/topic,7191.0.html