Hi togheter,
I need a Bowden cable from the gear lever to the engine (forward-neutral-back).
I am not sure which part I have to order from Catalina Direkt in order to send it to me in Europe. Can someone possibly give me a note or link so I can order the correct one.
Thanks and Greetings
Holger
According to Catalina Direct, the following is the part they recommend for shift cable on our boats:
Engine Control Cable 11'
C-34
Part #: F8098
However, they do specify it works for Westerbeke/Universal. Your signature shows a Yanmar. You should measure your cable length before ordering.
Good Luck,
Bill
Holger
The cables are simply Teleflex cables, nothing out of the ordinary.
I'd suggest contacting the Catalina parts department, who likely knows which one was on the Yanmar and possibly has one in stock, or could give you the Teleflex part number and you could find one more local to you.
parts@catalinayachts.com
Phone: 1-727-544-6681 (Florida time)
You just need to know the length and the correct threads. If you have that I could check the teleflex part number through my stocking marine distributor.
Ken
Holger : I would think that in Europe there must be a Bowder Cable manufacturer or something very similar!! Just get the 11 ft (51.9/60 cm) length and modify as necessary.
A thought
thx @all!
the problem is, the boat is in Croatia and I in Germany. I will go in September to the boat for work and then I need the cable. There is a marine shop but the thing ist, in Europa is gear with 2 sticks not common (We have 1-Stick for gear and gas thogether normaly) I dont know maybe is to special for the croatien marine shop (and my croatien spekk ist also bad :) )
I think I order the 11`PartNr F8098 and I give a notice that for the C34 with a Yanmar.
Holger
Quote from: Holger Dieske on July 13, 2021, 01:22:18 PM
thx @all!
the problem is, the boat is in Croatia and I in Germany. I will go in September to the boat for work and then I need the cable. There is a marine shop but the thing ist, in Europa is gear with 2 sticks not common (We have 1-Stick for gear and gas thogether normaly) I dont know maybe is to special for the croatien marine shop (and my croatien spekk ist also bad :) )
I think I order the 11`PartNr F8098 and I give a notice that for the C34 with a Yanmar.
Holger
Holger,
I reached out to CD for you and verified that the same cable is used on the Yanmar and the Universal engine.
The SeaStar (Teleflex) cable with 10-32 threads is number 3300/33C (attached.)
The 11-foot cable Teleflex cable is number
CCX63311You can find a local distributor here:
http://www.seastarsolutions.com/international-distributors-2/
Alles Gute
-ken
... a lot of thanks for your help!
Holger
Hogler : If you have trouble importing a 11 ft. Bowder cable - there is somebody in Europe /Germany that is manufacturing those kind of cables.
My old VW Bug had one for the clutch and many automobiles have Browder cables for their speedometers.
A thought