Recently my oven burner quit working. The pilot would light and stay lit, but I could not get the burner to light. In looking for help, I found a troubleshooting guide on the Sure Marine Services, Inc website.
Using the guide identified that the oven thermostat was not working and the pilot orifice was dirty. I cleaned the pilot orifice. Using their exchange program, I bought a remanufactured oven thermostat, and sent them my old oven thermostat as a core exchange.
I installed it today, and the oven works again. Unfortunately the PDF of the guide is too large to add to this post. For reference I added the troubleshooting guide to the "Galley" section, under the "Stove / Propane" category in the Tech WIKI.
:clap thx Jon! (read while traveling on a train in Switzerland)