Recent posts
#1
Main Message Board / Re: Beta Marine Engine repower
Last post by LogoFreak - Today at 09:47:13 PMI second that, replacing with a beta 25 makes no sense to me, it's undersized for a 34 footer.
#2
Main Message Board / Re: Adjust the cable tension f...
Last post by LogoFreak - Today at 09:30:59 PMI've filled in those "skag dimples", used closed cell expanding foam and layed up glass over those areas. Switching the stainless steel cables for dyneema instead to not have dissimilar metals (SS cables/aluminium quadrant).
#3
Main Message Board / Re: "Leaking" fiberglass hull
Last post by LogoFreak - Today at 09:25:52 PMLooks to me like water intrusion into hull, any blisters anywhere else? Was the hull sealed with an epoxy barrier coat?
#4
Main Message Board / Re: engine control cable
Last post by KWKloeber - Today at 07:45:17 PMCatalina Direct carries transmission cables.
#5
Main Message Board / engine control cable
Last post by Jack Morrison - Today at 05:58:11 PMI need to replace the gear selector cable on my 1998 Mk II. The outer casing of the cable has split and the cable is rusting. The metal sleeve of the cable is swelling and making the gear selector difficult to shift.
Has anyone any information in regard to replacing the cable?
Has anyone any information in regard to replacing the cable?
#6
Main Message Board / Re: Universal Video
Last post by KWKloeber - Today at 05:55:57 PMGreat vid thank you for sharing Ted!
Some inaccuracies but nice nonetheless.
Some inaccuracies but nice nonetheless.
#7
Main Message Board / Re: "Leaking" fiberglass hull
Last post by KWKloeber - Today at 09:57:10 AMQuote from: Ted Pounds on Today at 06:59:59 AMWhen I did some work on my skeg a looong time ago I recall running into some pink stuff that appeared to be fairing/filler compound....
Maybe that might be the same pink that's in the background, under the bottom paint that was ground back. Looks thin, maybe 1/4"?
I hope nothing was dripping from your strut area!!
He said it was pink stuff, I hope he didn't taste it go verify!
#8
Main Message Board / Re: "Leaking" fiberglass hull
Last post by Ted Pounds - Today at 06:59:59 AMWhen I did some work on my skeg a looong time ago I recall running into some pink stuff that appeared to be fairing/filler compound....
#9
Main Message Board / Universal Video
Last post by Ted Pounds - Today at 06:52:52 AM #10
Main Message Board / "Leaking" fiberglass hull
Last post by KWKloeber - Yesterday at 04:57:47 PMLike the issue of water from the tank puddling, has anyone ever seen or heard of puddled pink stuff eating/seeping thru the fiberglass hull?
The pic below is where bottom paint was peeling on a C30 and underneath the paint is dripping pink (or what looks like it) after the area was ground back.
For reference, the painted shaft is at the bottom (right behind the shaft log) and above it the drips from the ground out fiberglass substrate.
This looks bizarre to me.
The pic below is where bottom paint was peeling on a C30 and underneath the paint is dripping pink (or what looks like it) after the area was ground back.
For reference, the painted shaft is at the bottom (right behind the shaft log) and above it the drips from the ground out fiberglass substrate.
This looks bizarre to me.