Used Exhaust Riser

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Kyle Ewing

Cross-posted from marketplace for increased visibility...

I listed my used exhaust riser on ebay:  http://ebay.us/HIj9kB?cmpnId=5338273189

Description:
1990 Catalina 34 Universal M25XP Exhaust Riser Stainless Used in Fresh Water. Condition is Used.

Taken from my 1990 Catalina 34 with Universal M25XP in 2011 and stored since.  I estimate the engine had less than 1400 hours at the time.  I read horror stories about failed exhaust risers so decided to proactively replace.  If I had inspected before buying the new one from Catalina I may have waited.  Boat has always been used in fresh water (Lake Michigan).

Starting bid is $0.99 plus shipping.
Kyle Ewing
Donnybrook #1010
Belmont Harbor, Chicago
http://www.saildonnybrook.com/

Noah

#1
Cleaning out your garage?  8) Is this the boat's original 1990 exhaust riser? I was under the impression that the original Catalina risers were black iron, not stainless steel, but I may be wrong.
1990 hull #1014, San Diego, CA,  Fin Keel,
Standard Rig

Kyle Ewing

It's the riser on the boat when I got her in 2003.

Yes, I'm literally cleaning my garage and putting a bunch of stuff on eBay.  It's surprising what I get for some of it.  I've paid for a new wheel pilot so far!  I'll post an article about it one of these days.

I've been working remotely since March and the harbor is closed until Monday so I've had plenty of time to declutter.


Kyle Ewing
Donnybrook #1010
Belmont Harbor, Chicago
http://www.saildonnybrook.com/

Ron Hill

Noah : Catalina factory changed from black pipe to stainless risers near the end of the 1987 production. 
I published the 1987 hull# in the Mainsheet tech notes, but don't recall it now.

A thought
Ron, Apache #788