Bilge Drainage From Area Under Stuffing Box

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ken Juul

before you drill more, pour some water and see if it drains.  I think you might be hitting the floor of the engine compartment which is part of the liner not the hull.
Ken & Vicki Juul
Luna Loca #1090
Chesapeake Bay
Past Commodore C34IA

rmbrown

Oh, it's definitely not draining... I had to bail it out to take the picture!
Mike Brown
1993 C34 Tall Rig Wing Keel Mk 1.5
CTYP1251L293
Just Limin'
Universal M-35AC

Ken Juul

was that before or after you opened up the hole?
Ken & Vicki Juul
Luna Loca #1090
Chesapeake Bay
Past Commodore C34IA

rmbrown

Can't open hole.  It's clear for about 1.5 inches then fully obstructed.  I can't determine if it was never drilled all the way through or if it's just a solid clock.  I'm hesitant to put a drill bit in there until I know what I'm dealing with.  Emails exchanged with Catalina but no final answer yet.
Mike Brown
1993 C34 Tall Rig Wing Keel Mk 1.5
CTYP1251L293
Just Limin'
Universal M-35AC