replacing cutlass bearing

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bill Shreeves

I used Dan's cutlass tool last Spring and it worked great.  Thanks Dan!  It made pulling the prop shaft out and installing the new one possible without dropping the rudder.   BTW, a local prop shop loans their honest to goodness prop puller and it also worked great!  I highly recommend both.


-Bill
The only thing that always works on an old boat is the owner...

Bill Shreeves
s/v "Begnnings" 1987 Shoal Draft #333
M25XPB, Worton Creek, MD