Shower Bilge

[KINGAIR350]

Hello,
Is there a direct substitute for the 3 7 2 0 2 - 0 0 0 0 that is being use in the shower sump area
Regards and Thanks in Advance
Kevin
#5 5 3

[Gary]

Hi Kevin,

If you are referring to the shower sump pump this should be the model http://store.hamiltonmarine.com/browse.cfm/pump-shower-bilge-12v-4.5-gpm-7.5-amp-120446/4,52515.html

Replaced ours this spring (1986 C34). The model was a perfect replacement to the original including attachment screw holes. It also includes an inline strainer to be installed between the sump and pump.

Gary

[KINGAIR350]

Gary,
Thanks for the quick reply , same as what I have in ours, but the pump is is loud everyone in the Marina knows what you are doing.
Many Thanks
Kevin # 5 5 3

[KWKloeber]

Gary,
Thanks for the quick reply , same as what I have in ours, but the pump is is loud everyone in the Marina knows what you are doing.
Many Thanks
Kevin # 5 5 3

There's a newer version with a shroud over the pump arm.

Ken

[Stu Jackson]

Gary,
but the pump is is loud everyone in the Marina knows what you are doing.

Kevin,

That's GOOD!   

They know you're taking a shower and are nice & squeaky clean!   

[Ron Hill]

Kevin : You can replace the Whale diaphragm pump or substitute a rotary pump (like your fresh water pump) instead.  Your choice!!

A thought

[KINGAIR350]

Hey Guys,
Thanks for the in put I'm going with the Whale product Ron, as far as everyone knowing I'm taking a shower it's kinda like the Admiral thing also
Regards,
Kevin

[crieders]

I thought about replacing mine. How do you reach the thing?

[Ron Hill]

Cliff : With some difficulty, thru the door under the head sink!! 
You can gain a bit more room to work with by removing the door and the frame.

A thought