Hatch Storage Bracket

[dfloeter]

I have replaced the Hatch Storage Bracket that mounts on the engine cover.    The old Starboard bracket is now loose and available to anyone who may want it for the cost of shipping.    Attached are some images of the old and new.    8/4 mahogany is a passable complimentary wood to the teak.   

This piece came from a 1996 Mark 2 C34.

[sailr4]

I'm interested.  Are they still available?  Do you have any pic of them installed?

Rob
No Worries
Solomons, MD
sailr4@yahoo.com

[dfloeter]

To be clear, what I have as excess is the original plastic shoe.     Yours if you want it.

[sailr4]

Can you show me or describe where it mounts? How do hatch boards stow?

[dfloeter]

Sure, I do not have any pictures of the install but the three boards slide into this shoe of sorts along the port side of the companionway wall along the steps and above the engine hatch.   There is also a bungee cord stretched between two plastic blocks positioned 18" or so higher to help support the boards.   If I can get to the boat in the next couple o days I will shoot an image to send.

[sailr4]

Sounds good. Sent you PM with address. Let me know what shipping is. I'll cut you a check or pay pal or whatever. Still like to see photo if you get a chance.