Cockpit Drains

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Brad Young

Getting ready to replace my cockpit drains. They are cracked and do not look so good. I have read where folks have thought it was a good idea to put in larger ones. Has anyone done this? If so how big did you go?
Any suggestion on which drain to use?

Thanks
brad
Brad Young
Boat
Year 1986
Model C34
Hull# 84

Ron Hill

Brad : I believe that Gerry Douglas did a more than adequate sizing of the two 1 1/2" cockpit drains that you have.

Not too sure why you would want larger drains? But
If you feel the size is inadequate for the amount of water in the cockpit - then put a couple of electric pumps inline in each gravity drain and have a power scuppers.   A thought & suggestion
Ron, Apache #788

Stu Jackson

When I redo mine, I'm gonna cross them.  I'm tired of stepping in a puddle on port tack.
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Ron Hill

Stu : Good luck, you might be able to do that, but most (after 1986) have a rear water tank and I don't think there's space to cross those scupper lines.   
Ron, Apache #788

Lance Jones

Did either Stu or Ron figure out the hose size and length? How hard are these puppies to replace?
Lance Jones
1988  C-34 Kitty's Cat
S/N 622

Ralph Masters

The hoses are for sure 1 1/2 inch hose.  I bacame very aware of mine on our 87 while working in the lazzerrt on my propane system instalation..  Crossing them sounds like a great idea.

Ralph
Ralph Masters
Ciao Bella
San Diego
Hull 367, 1987

waterdog

You really want to have your drains smaller than your hose which sounds obvious.  But if you have a big drain, big hose, and a small through hull the blockage will be out of reach.  So going bigger means bigger all the way which means bigger holes in the hull - probably not desireable.  You might want to stick with what you have. 

Treat your hose as though it is below waterline - proper grade reinforced double clamps etc.   It is above waterline at the dock, but not underway...
Steve Dolling
Former 1988 #804, BlackDragon - Vancouver BC
Now 1999 Manta 40 cat

Les Luzar

Brad,
The cockpit drains on the Mk I's are larger than the Mk II's, and as Ron says, I don't think that you need to enlarge them. I have never had an issue with the size of these drains.
Les Luzar
#355    1987
Windshadow
Long Beach, CA

waterdog

I have been the one of the people to suggest that the cockpit drains are inadequately sized - this was in the context of using the c34 offshore.   And you would really need to have some pretty nasty seas breaking into the cockpit to get in trouble.   Anybody crossing an ocean has a number of things on their to do list if they are thinking of taking a C34.   Drain size is not an issue otherwise.     Definitely not an issue on the MKII which has the ultimate cockpit drain. 


Steve Dolling
Former 1988 #804, BlackDragon - Vancouver BC
Now 1999 Manta 40 cat

Ron Hill

Brad : The MKIIs and the walkthru transom MKIs have NO problem -- they just let it flow out the rear.

Ron, Apache #788

scotty

Has anyone ever modified a MKI to open up the transom?  How was thet done on the factory MKIs?
Scotty

Ron Hill

#11
Scotty : It was simply done by the factory - making new hull & deck molds.  

Don't believe this (change to a walk thru transom from a standard transom) is an owner "do-it-yourself" kind of task!!
Ron, Apache #788

Stu Jackson

Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."