3 Blade Prop Pitch

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

Ron Hill

#15
March 19, 2012, 02:19:50 PM Last Edit: March 19, 2012, 02:20:29 PM by Ron Hill
A prop should be stamped with the diameter and the pitch -- like Stu's picture shows.
 
This stamping however, is usually on the aft portion of the prop hub.  
Ron, Apache #788
Print
Go Up Pages 1 2
User actions
SMF 2.1.4 © 2023, Simple Machines
ProCurve Theme Made By : TwitchisMental