Two Part Polyurethane Varnish Drips on Gelcoat

[shanagolden]

Anyone out there have some suggestions for the removal of some two-part polyurethane varnish that dripped on the gel coat and cured.
Seems like pretty hard stuff. Wondering if there is a solvent that might soften it up but not damage the gel coat.

[Stu Jackson]

Acetone, paint remover, brush & roller cleaner or laquer thinner come to mind. 

If those don't work, wet sanding and then compounding and wax should do the trick.

Whatever course you choose, it'll be work.

[Ron Hill]

Shan : Take a small square of cloth, put it over the drip and then keep the cloth wet with MEK for an hour or two.  I believe that will soften the drip enough to carefully scrap it off the the gelcoat. 

Hope this helps!!