Sealing The Deck Core From Moisture (A photo how to)

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mainesail

Hi All,

For years I have been trying to describe, as have others, in words, how to "pot" or fill deck hardware penetrations with thickened epoxy to seal the decks core from further moisture damage. I have learned a lot from this community and from the likes of members like Stu and wanted to pay back a little of what I've taken away to this site.

I have also been trying to describe why a slight bevel to each hole that penetrates the deck is a good idea. Sometimes folks understand it via words, and sometimes they don't. There are other methods to achieve the same outcome but this is the one I have found over the years to be the most reliable..

I have had this article on my mind for years and finally over the last month or so had the chance to make it all happen with  some late nights in the barn.

As far as I know this is the only article of it's type that uses deck lamination cut-a-way samples to show what goes on inside the deck when you "pot" with epoxy and countersink the bolt holes..

I hope this helps make some sense of something that really isn't all that difficult to tackle just difficult to describe..

If you see any typos, and I'm sure you will, please let me know and I'll fix them as soon as I can. I'm not a writer,:doh: but do have a lot of tricks & techniques I've learned over my years of boating that I like to share with fellow boaters. Some of these I feel can best be illustrated through pictures, with the help of some words of course..

Click this to read it:

Sealing Deck Penetrations To Prevent Core Rot (LINK)



And some of the photos from the article;





-Maine Sail
Casco Bay, ME
Boat - CS-36T

https://marinehowto.com/

289cobra1