Mast Removeal - Keel Stepped

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sselinger

Can anyone provide some guidance on the design of the lifting bridle to pull a keel stepped mast. I am pulling mine for the first time and would like to know attachment points and where the lifting position should be.

Steve Selinger
Aquila #1047

lazybone

You should have this done by a yard that knows what it's doing.
If their good, they'll explain it to you.
Ciao tutti


S/V LAZYBONES  #677

Stu Jackson

A big wide strap with lotsa padding at the section that goes around the mast, balance point is kinda under the spreaders which are more than halfway up the mast extrusion (because of the length from the deck down to the keel step).  Don't forget the coin under the mast when you replace it!
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Ron Hill

Steve : Be sure to read my Mainsheet article on pulling a Keel Stepped Mast!! 
Ron, Apache #788

rappareems

I pull mine every year... the strap goes around the spreaders.  Several folks involved, one at the base to hold the spar down as it will be a tad top heavy, but fairly well balanced.
Mark Cassidy
#232 1986
"Rapparee"
Lake Ontario

Phil Spicer

don't forget to unplug the lights & remove the deck hold-down hardware form the sail track
Phil & Marsha,Sandusky Sailing Club. Steamboat is #789,tall/wing-Unv M25XP/Hurth ZF 50 trans.

Dan K

Ron,

When was your Mainsheet article published?
Dan Kenshalo
#088
"Significant Other"
Chesapeak Bay, MD