furling line fairings ??

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fuzzy

The small plastic rollers that control the
furling lines (Hood model 915 LD) are wore out
and broken. Trying to find where to get new ones
I haven't found the manufacturers name anywhere
and I checked the search on this site with no
luck so far.  Does anyone have any ideas?

Thanks for the infor on my last request looking
for hatch parts, found them and they're on
order.
Thanks, Larry

Stu Jackson

Larry

Most any marine store would have them.  The ones that came with your boat (???hull # and year???) may not be made anymore, but were most likely Seaward.  Johnson, Schaefer, Harken and others make a wide variety of fittings.  Some are easier to install than other, and some run the lines outside the lifeline stanchions to give you more room on deck.

Stu

PS

Please register for the message board, or at least give us your hull # and year.  Please see:

http://c34.infopop.cc/eve/ubb.x?a=tpc&s=329609511&f=829605811&m=804605437
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

Ken Juul

I got my replacements from:

Pompanette Showroom and Customer Service
1515 Southeast 16th Street
Fort Lauderdale, Florida 33316
Phone: (954) 525-6367
Fax: (954) 525-4025
or
881 Production Place
Newport Beach, California 92663
Phone: (949) 650-0310
Fax: (949) 650-1824
Pompanette customer service: Pompanette@Pompanette.com
Ken & Vicki Juul
Luna Loca #1090
Chesapeake Bay
Past Commodore C34IA

Tom Glennon

I purchased some nice streamlined Ronstat double rollers at west marine...
Tom Glennon, Slow Dance #354, 1987, Buzzards Bay, Massachusetts

ross99

I also have 2 or three of the original 915 fairlead blocks in a locker on my boat.  The furler was upgraded to the single line version in the early 90's by a PO,  so they were only a few years old when they went into "storage". a few bucks for shipping costs and they are yours. Email me at ross9128@aol.com if you are interested.

Jim "SV Ohana"

Got same issue, following is reply from my inquire to Hood:

Hello Jim,

You can purchase the stanchion block sheave only by calling Hood
customer
service @ (603)826-5791 & mentioning part number H6810-01. Please let
me know if
you have any other questions.

Best regards,
Devon Burbank
Hood Yacht Systems