material Mast

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Holger Dieske

does anyone know the thickness of the material of the mast
I am a cruiser/Liveaboarder from Germany and I use Google-Translator! (and a little bit my brian ;) )

C34 "RUNAWAY" Mark 1.5 - 1992 WK - Hull Nr. 1219 - Yanmar3GM30F - Flag: German - Boat stay at the moment in Mediterranean Sea.

Phil Spicer

Holger,my mast thickness measures between 4.75 mm and 5.08 mm. The front of the mast is a little thicker,
 reading 5.01 mm to 5.08 mm. The sides and back by the sail slot go down to 4.75 mm.
 This is my 1988 mast. I don't know if catalina made any change in masts between 1988 and 1992. Stu or Ron
may know more about that type of a change. Hope this is a helpful start to answer your question.
    Phil
Phil & Marsha,Sandusky Sailing Club. Steamboat is #789,tall/wing-Unv M25XP/Hurth ZF 50 trans.

Holger Dieske

Thanks Phil. I ask because I want to mount my mast with mast steps and I want to determine the right rivets for it. I can now count well with 5mm.
I am a cruiser/Liveaboarder from Germany and I use Google-Translator! (and a little bit my brian ;) )

C34 "RUNAWAY" Mark 1.5 - 1992 WK - Hull Nr. 1219 - Yanmar3GM30F - Flag: German - Boat stay at the moment in Mediterranean Sea.