Replacing/relocating holding tank

[Dave Spencer]

I understand that Peggie has retired from personal consulting on marine sanitation systems. I was fortunate to speak with her 6 or 8 years ago when I made some modifications to my OEM system. But her advice lives on in books available on Amazon and elsewhere.

[LogoFreak]

I'll look up the book, boat is getting splashed on February 26th so not much time left. Focus is now to get all the thru hulls done, finish fairing the bottom and painting. For the time being head is getting hooked up to thru hull valve as direct overboard discharge.

It's a temporary setup and for emergency use only, once I'm back in my slip I can continue the refit and finalize the holding tank design.

[LogoFreak]

New location of the raw water intake thru hull/ball valve and sea strainer.

[waughoo]

Nice... should free up a bit of space in the galley under sink cabinet!!

[LogoFreak]

Original location was under the head sink.

[waughoo]

Ha... yep.  Head sink is what i meant to write.

[LogoFreak]

I realize that it doesn't have much to do with the holding tank but since I wanted to relocate the engine raw water intake to the noon poopy side I'm posting these updates here LOL.

Thru hull location picked/drilled and all mocked up.