Rope clucthes

[paule]

Anybody replace their Garhauer Rope clutches can
remove the one bolt but can't find the bolt under the lever

Paul

[waughoo]

I just did one of mine and there is a screw towards the stern end.  To get at it you need to flip the lever nearly 180 degrees to the forward side.  This lifts the cam up ao you can get at it.

The forward screw was actually the harder one for me to get at as the cams and levers all had to be in just the right spot to get down in there.

[paule]

Thanks.

I was able to get the one at the stern it is the forward one that I can't see thought there was a trick


Paul

[waughoo]

There isnt much room, but when you get the lever in the right spot you can get down there to remove the screw.  Here is a pic of mine looking straight down to the screw hole at the forward end.