Cleat Size; Photo From Underneath

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

crieders

What is attached is a picture from underneath the cleat. There was some movement in the cleat after the boat was tied up during a storm with high winds.  My thought is to replace it, perhaps with a little bit bigger studs, although hopefully in the same holes.  I would also use a backing plate.  Any recommendations for size and manufacture?
Cliff Rieders, c34 tall rig, 1990, hull #1022

KWKloeber

Twenty years from now you'll be more disappointed by the things you didn't do, than by the ones you did.
So throw off the bowlines.  Sail away from the safe harbor.  Catch the tradewinds in your sails.
Explore.  Dream.  Discover.   -Mark Twain

Ron Hill

Cliff : if you are bound and determined to buy a new cleat - then you need to show the top view NOT the underside!!! 

The Catalina factory has used a number different of 8" and 10" cleats!!!   :think

A thought
Ron, Apache #788