Fresh Water Head and Overflow Control

From c34.org
Jump to navigation Jump to search

by R. Norquist


I got a little tired of the Head Overflowing when someone forgot to leave the handle down. I decided to convert the smaller starboard Fresh Water Tank to a dedicated fresh water supply for the head. The starboard water tank is about the same size as the holding tank. This is great because you reduce the risk of overfilling the waste tank. I added a 1/2" Tee off the inlet sea cock and put a 1/2" ball valve and a one way check valve on the fresh water inlet side of the Tee. Then disconnected the stabbed fresh water tank from the fresh water supply system and ran a direct line from the water tank to the Tee. Then connected to the head inlet line to the other side of the Tee.

End result and benefits:

  1. I don't need to use the inlet sea cock. It stays shut. I only need to open the ball valve to the fresh water tank.
  2. The head never overflows. The top of the head is is just a little higher than the top of the water tank.
  3. The head odor disappeared or at least is better. You don't have all those sea water microbes dying and causing additional odor.
  4. We only use the large stern water tank for drinkable water. We use it more and this keep things fresher.


THIS IS NOT A GOOD IDEA. Here's why: http://c34.org/bbs/index.php/topic,7564.0.html [Stu - 6/8/2013]


Another Option

I had this occasional flooding problem as well and initially my fix was to put a tee the drain on my sink just above the thru hull and used that as the water supply for the head. Works well w/ thru hull closed, just run water and/or wash in the sink after using the head and pump that water through the head. Great for typical day use. Cruising for a few days and need to save water just open the thru hull & don't to close the switch on the head!

I recently upgraded to an Electric Marine Toilet which I highly recommend doing - great upgrade - and I have it plumbed in the same way though it has an electric pump to pull the water into the bowl. The big win is when the thru hull is open it pulls sea water into rinse and between the pump restricting the water flow and the bowl being 3 inches higher (above waterline) everything stays dry. Offshore with a Y valve it gets even better.