Boom Seperated from Gooseneck

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mark_53

My boom has completely detached from the gooseneck (see photo). Looks like there is a single cotter pin that has corroded and allowed the fitting to slide out of the boom thus detaching from the gooseneck.  I'm thinking if I unscrew the four screws holding the boom cap I will be able to install a new cotter pin.  Seems like the cotter pin is not the most secure way of holding the boom to the mast.  Recommendations on how to repair are sought.

Stu Jackson

Please read Critical Upgrades, IIRC it's on page 3
Stu Jackson, C34 IA Secretary, #224 1986, "Aquavite"  Cowichan Bay, BC  Maple Bay Marina  SR/FK, M25, Rocna 10 (22#) (NZ model)

"There is no problem so great that it can't be solved."

mark_53