Print Page - Beckson ports

Title: Beckson ports
Post by: rappareems on October 19, 2010, 09:06:04 AM

I am planning on "tuning up", and rebedding my Beckson ports come Spring. I have read the posts and copied all the information, sketches and pictures and checked out the Beckson site... Does anyone know what sizes I would need to order, gaskets, lenses and screens? The boat is going to be covered PDQ and if the sizes are available without me crawling all around I would appreciate it. I plan on doing them all.

Mark

Title: Re: Beckson ports
Post by: Stu Jackson on October 19, 2010, 09:14:40 AM

5 x 12 all of them, so noted in this wiki: http://www.c34.org/wiki/index.php?title=Rebedding_Beckson_Ports

Title: Re: Beckson ports
Post by: rappareems on October 21, 2010, 07:08:22 AM

Thanks Stu,

I copied that Wiki but missed that refererence right under Basic Steps...

Mark

Title: Re: Beckson ports
Post by: Ron Hill on October 21, 2010, 05:30:10 PM

Mark : As an aside. I rebedded my 2 Beckson ports back in the early 1990's.
Because that was BTIN (before the internet!!), I went to a Boat US store and found a new port in the box. Read the installation instructions and then went back to the boat. Took mine apart and rebedded them. A thought

Catalina 34

General Activities => Main Message Board => Topic started by: rappareems on October 19, 2010, 09:06:04 AM