Today, the upholstery shop closed.
It's the grand opening of the sail loft. We switched from straight stitch to zig zag and smaller needle with finer thread. 1 subassembly down. 4 more to go...
I had always thought kit sails would be a poor alternative to a professional job. As it turns out, the materials and cut are as good as any you can get at a professional loft. The only difference is how much care and attention you put into the job - something completely in your control. No reason this shouldn't turn out to be a nice A-sail.
Whaaaaaaaaaaaat!!!
No Hawaiian leopard spots?
It's actually made from synthetic materials. Once the sail has it's complete shape, then I add the design elements. Don't worry, it won't be a big white sail...
Sorry to announce the Blackdragon Sail Loft is now closed. We appreciate the business from all our patrons over the last number of weeks.
Hats off to you Steve, that is one awesome sail :clap
Now that's gotta make everybody smile! Super sweet sail man!! 8) 8)
Very nice sail....should scare away any pirates...is that (now sad looking) main next?
Who did you get the kit from? First I have heard of a diy sail. As the sail material is much thinner than canvas, do you think you could have sewn it on a regular sewing machine?
I bought the kit from Sailrite: http://www.sailrite.com/
I think it was just over $1000. The kit had 49 panels and you can select any color you like for any panel.
This could be done with a home sewing machine. The tough parts are the corners where you need to stitch through 6 layers of dacron, two layers of webbing and four layers of nylon in places. With the right needles, I think it could be done. The instructions suggest hand stitching the corner patches if your machine won't go - I think that would be a big job. Maybe you run into a local upholstery shop to have the corners stitched. A sail maker would be a better choice, but I'm not sure how excited they would be about facilitating kit built competition.
It's a very straightforward project with easy to understand instructions. You are on your own if you want to inlay a dragon/hawaiian leopard spots or whatever. Just cut out whatever shape you want with soldering iron, stick it on with double sided tape, stitch the perimeter, cut out the background fabric and stitch over your cut line.
When it's time to do my main, I will definitely buy a kit. Dacron is easier to work with than nylon spinnaker fabric.
Well done - nice looking sail. :clap I have been thinking of doing a headsail for a while now and this may be the inspiration. A few years ago, I bought a mainsail kit for my previous boat from Sailrite and agree with everything you say - these are great kits and the quality of the sail is in your control. I would recommend however to anyone attempting a mainsail with 6-7 oz dacron to invest in a good sewing machine. The home machines cannot tension the thread for the type of construction required. I suspect you would probably have a difficult time with a lightweight cloth too. The Sailrite machine has a 7 lb. fly wheel to punch thru the fabrics and maintain steady sewing speeds whereas home machines struggle with this.
Ken, without a doubt, I think you should definitely pick one up...and see if you can talk Steve out of his sewing machine while you're at it... :D
Steve,
What were the dimensions you used for your sail?
I'm interested in buying one from Sail Rite too.
Thanks,
Steve
Steve,
I ordered the stock A-sail from their list:
CATALINA 34 STANDARD ASYMMETRICAL Luff 43.72*ft (13325mm)
Foot 22.28*ft (6790mm)
Leech 40.22*ft (12259mm)
Perc LP 165*
Area 731*ft2 (67912mm2)
I never confirmed the dimensions. I just built the thing and lived for about a week thinking for sure they had shipped the wrong sail. It was enormous. It went from the top of my stairs through the front hall and to the far side of my living room. I had nowhere I could lay it out. I just kept sewing on faith hoping that blindly mating panel 43 to panel 44 was the right thing to do. It wasn't until I flew the thing that I actually found out it was the perfect size. The only thing I would do differently is make my sock about a foot longer - better a bit short than catching on the clew I suppose.
All right Steve. You've forced a confession.
It wasn't all beautiful. I was with my buddy, a power boater - you gotta grab whatever unemployed people are available. I had to test the spinnaker. It was blowing maybe eight to ten knots. Didn't do anything fancy like raise a main and blanket it nicely. I couldn't wait until the sock was finished.
So...
Organized the sheets. Got the tack set up off the furled jib with my fancy hand stitched double D ring slingy thing. Then it was just a simple matter of pull on the halyard, right?
Just in case, I made my buddy put on his vest too and showed him where the knife hangs on the pedestal...
So I jumped the halyard. Not nearly fast enough. It kind of went "whumph" and "bang" and all of a sudden I had a full spinnaker about two thirds hoisted with the bottom ten feet dragging in the water. And in no time were doing six knots.
Now I've only just put in the spinnaker halyard. Riggers says leave it at the mast - don't need it aft. I can tell you that 400 lbs plus hanging from the halyard would not get the sail up and out of the water. Had to blow the sheet try again. Pulled it down and ran the halyard aft (I trust my rigger but not enough that I would cut the extra fifteen feet off the halyard).
Eventually got it all sorted out. I flew it again a few days later with a sock and I have to say that it is not nearly as exciting...
Steve - Ah, that sounds fun! Sunday would have been a great day for an A-chute. There was only 5-6 knots of breeze, but favorable current and sunshine! But alas, the winds are so flukey in the San Juans that I usually don't even want to bother trying to setup my whisker pole, then having to gybe it ten minutes later. So, I'm pretty happy that I invested the funds in the Kiwi prop instead. It works on all points of sail. I just lost .3 knots of motoring speed over my 15x10.5 3-blade.
I appreciate that you have a different set of objectives for your upcoming adventures.
Craig
Quote from: Susan Ray on April 23, 2009, 08:57:12 AM
Very nice sail....should scare away any pirates...is that (now sad looking) main next?
I got an answer to this question today. The sad looking main ripped open the stitches on a seam 2 feet in from the leech. It's been declared unworthy of a Mexican vacation and a replacement kit was ordered from Sailrite tonight. The Blackdragon sail loft is open again!
OK Susan. Here's the answer to your challenge. The new main is done.
The thing with a main is the first thing you do with your sail is take it to a professional sail maker and have them press in the rings. So you are exposed to critique before you've even laid a halyard on it.
It was a pleasant surprise when I picked it up. Dennis from North Sails wasn't really sure if I had sewn it myself. He thought it was a pretty damn good looking sail and better put together than most he has seen. No issues sailing to Mexico and back and wherever for years and years. Now I just need some wind...
Lovely sail....you are GOOD at what you do...fair winds and following seas to you..