What is attached is a picture from underneath the cleat. There was some movement in the cleat after the boat was tied up during a storm with high winds. My thought is to replace it, perhaps with a little bit bigger studs, although hopefully in the same holes. I would also use a backing plate. Any recommendations for size and manufacture?
Cliff
see previous replies:
https://c34.org/bbs/index.php/topic,10850.0.html
Cliff : if you are bound and determined to buy a new cleat - then you need to show the top view NOT the underside!!!
The Catalina factory has used a number different of 8" and 10" cleats!!! :think
A thought