Stanchion Sealant

[Hull#753]

Could BLUE MOON bear the honor of 1st boat with technical questions on the new & improved C34D?
 
 I lieu of calling Factory, does anyone recommend TYPE of sealant, i.e. particular BRAND for re-bedding straightened stanchion onto deck?
 
 Thanks, John

[Roc]

I would use either LIFECAULK or 3M 4200.  My preference would be Lifecaulk.

[sselinger]

If you are trying to seal the stanchions with the thru deck vents for the hold tank or water tank, I have found very little which works for any length of time. The best fix I found, suggested by the surveyor, is to make a gasket out of a .125" neoprene. Then seal both sides with any good sealant.
 
 Steve Selinger
 Aquila #1047